mechanical seal MG1

MG1/MG12/MG13 mechanical seals are mainly used in clean water, sewage, oil and other moderately corrosive media. The most commonly used ones are the MG series mechanical seals. The bellows is not subject to any torsion force. It is exquisitely designed and has multiple functions, such as: pushing the moving ring, serving as a secondary seal and a driving member of the moving ring. The moving ring is driven by the L ring and spring without bonding. The moving ring can be replaced with various materials. It can be used in wastewater and sewage containing particles.

Working parameters

Shaft diameter: 10~110MM

Temperature: 20 to +120 degrees Celsius

Pressure: ≤1.2MPa

Line speed: ≤10 meters/second

Material combination

Static ring: tungsten carbide, silicon carbide, alumina ceramics Moving ring: carbon graphite, silicon carbide

Auxiliary seal: fluorine rubber (VITON), nitrile rubber (NBR), ethylene propylene rubber (EPDM)

Spring and metal parts: 304, 316L

Static ring form: Standard: G60 Alternative: G6, G9

Product Description

single end

Unbalanced type

Any rotation

Rubber bellows

Comply with EN12756 (DIN24960) standard

When developing and designing any product, we follow the principle of standardization of installation dimensions. That is to say, the installation ruler of this model of mechanical seal complies with international and domestic standards (API610, API682, DIN24960, ISO3069, GB6556).